Self‐assembled polyurea macromer nanodispersion and resulting hybrid polyurea‐acrylic emulsions and films

A polyurea macromer (PUM) was synthesized and dispersed in basic conditions to form self‐assembled nanoparticles (<20 nm dispersions, up to 30 wt % aq. soln.). These nanoparticles enabled surfactant‐free emulsion polymerization to form hybrid polyurea‐acrylic particles despite the absence of a measureable water‐soluble fraction. The T_g of the starting PUM material was a strong function of the PUM's extent of neutralization and hydration (varying between 100 °C and >175 °C) due to changes in hydrogen and ionic bonding. Two separate hybrid polyurea‐acrylic emulsion systems were prepared: one by direct polymerization of (meth)acrylic monomers in the presence of the nanodispersion and a second by a physical blend of PUM nanodispersion with an acrylic latex control. The direct polymerization method resulted in a hybrid emulsion particle size that developed by a mechanism resembling conventional emulsion polymerization and was unlike that described for seeded polyurethane dispersion systems. Film hardness was shown to increase with increasing coating thickness for the hybrid film prepared by direct polymerization. The resulting mechanical properties could be explained by applying mechanical models for a composite foam structure. These results were unprecedented for normal elastomer films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1373–1388     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications

Polyetheretherketone (PEEK) is a thermoplastic material with outstanding properties and high potential for biomedical applications, including hermetic encapsulation of active implantable devices. Different biomedical grade PEEK films with initial degree of crystallinity ranging from 8% to 32% (with or without mineral filling) were inspected. PEEK surfaces were treated with nitrogen RF plasma and the effects on materials crystallinity and self‐bonding were evaluated. In particular, the relationship between auto‐adhesive properties and crystalline content of PEEK before and after plasma treatment was examined. PEEK samples showed different bonding strength depending on their degree of crystallinity, with higher self‐bonding performance of mineral‐filled semi‐crystalline films. XRD did not show any modification of the PEEK microstructure as a result of plasma treatment, excluding a significant influence of crystallinity on the self‐bonding mechanisms. Nevertheless, plasma surface treatment successfully improved the self‐bonding strength of all the PEEK films tested, with larger increase in the case of semi‐crystalline unfilled materials. This could be interpreted to the increase in chain mobility that led to interfacial interpenetration of the amorphous phase.     

Octadecanuclear Gear Wheels by Self‐Assembly of Self‐Assembled “Double Saddle”‐Type Coordination Entities: Molecular “Rangoli”

A series of self‐assembled “double saddle”‐type trinuclear complexes of [Pd₃L′₃ L ₂] formulation have been synthesized by complexation of a series of cis‐protected palladium(II) components with a slightly divergent “E‐shaped” non‐chelating tridentate ligand, 1,1′‐(pyridine‐3,5‐diyl)bis(3‐(pyridin‐3‐yl)urea ( L ). The cis‐protecting agents L′ employed in the study are ethylenediamine (en), tetramethylethylenediamine (tmeda), 2,2′‐bipyridine (bpy), and 1,10‐phenanthroline (phen), for 1 , 2 , 3 , and 4 , respectively. The crystal structures of [Pd₃(tmeda)₃( L )₂](NO₃)₆ ( 2 ), [Pd₃(bpy)₃( L )₂](NO₃)₆ ( 3 ), and [Pd₃(phen)₃( L )₂](NO₃)₆ ( 4 ) unequivocally support the new architecture. Two of the “double saddle”‐type complexes ( 3 and 4 ) are suitably crafted with π surfaces at the strategically located cis‐protecting sites to facilitate intermolecular π–π interactions in the solid state. As a consequence, six units of the 3 (or 4 ) are assembled, by means of six‐pairs of π–π stacking interactions, in a circular geometry to form an octadecanuclear molecular ring of [(Pd₃L′₃ L ₂)₆] composition. The overall arrangement of the rings in the crystal packing is equated with the traditional Indian art form rangoli.     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

双电极法现场快速检测地下水和湖水中碳酸氢根和碳酸根

地下水和湖水中碳酸氢根( HCO-3)和碳酸根( CO2-3)含量是地球化学碳行为和碳循环的重要表征,但两种离子的浓度易受环境影响而改变,因此,地下水和湖水中HCO-3和CO2-3真实含量的测定一直是个难题。实验利用CO2的水解平衡,通过pH电极和二氧化碳电极联用,建立了HCO-3和CO2-3现场快速测定的新方法,解决了地下水和湖水中HCO-3和CO2-3真实含量的测定难题。研究结果表明,在pH=4.8±0.1的底液中, HCO-3和CO2-3的线性范围分别为0.027~570 mg/L和1.25×10-8~39.7 mg/L。共存的金属离子、强酸阴离子(K+、Na+、Mg2+、Cl-、SO2-4,100 mg/L)、弱酸阴离子和弱酸(HSO-3、NO-2、HOAc,50 mg/L)对测定干扰小于5%。实际水样加标实验回收率在95.2%~99.2%之间,相对标准偏差为2.6%~3.7%。与酸碱滴定法进行对比,本方法的准确性良好。但方法受温度影响,因此标准溶液与样品应在同一温度下测量。总体而言,双电极法灵敏、快速、经济且电极携带方便、操作简单、对环境要求不高,十分适合现场和室内一般自然水体的快速检测。本方法已成功应用于青海省地下水和青海湖湖水中HCO-3和CO2-3的现场测定。实验表明,海东地区地下水样品pH在6.4~7.4之间,HCO-3含量为234~4096 mg/L,CO2-3含量为0.16~1.89 mg/L；青海湖湖水样品pH≈8.7,HCO-3含量范围在1.36~1.86 g/L,CO2-3含量在32.3~43.9 mg/L,与文献结果吻合。     

A Self‐Assembled Superhydrophobic Electrospun Carbon–Silica Nanofiber Sponge for Selective Removal and Recovery of Oils and Organic Solvents

An oil spill needs timely cleanup before it spreads and poses serious environmental threat to the polluted area. This always requires the cleanup techniques to be efficient and cost‐effective. In this work, a lightweight and compressible sponge made of carbon–silica nanofibers is derived from electrospinning nanotechnology that is low‐cost, versatile, and readily scalable. The fabricated sponge has high porosity (>99 %) and displays ultra‐hydrophobicity and superoleophilicity, thus making it a suitable material as an oil adsorbent. Owing to its high porosity and low density, the sponge is capable of adsorbing oil up to 140 times its own weight with its sorption rate showing solution viscosity dependence. Furthermore, sponge regeneration and oil recovery are feasible by using either cyclic distillation or mechanical squeezing.     

Molecular dynamics simulation of DNA‐directed assembly of nanoparticle superlattices using patterned templates

DNA‐directed assembly is a well developed approach in constructing desired nano‐architectures. On the other hand, E‐beam lithography is widely utilized for high resolution nano‐scale patterning. Recently, a new technique combining these two methods was developed to epitaxially grow DNA‐mediated nanoparticle superlattices on patterned substrates. However, defects are observed in epitaxial layers which restricts this technique from building large‐scale superlattices for real applications. Here we use molecular dynamics simulations to study and predict defect formation on adsorbed superlattice monolayers. We demonstrate that this epitaxial growth is energetically driven by maximizing DNA hybridization between the epitaxial layer and the substrate and that the shape anisotropy of the DNA‐mediated template posts leads to structural defects. We also develop design rules to dramatically reduce defects on epitaxial layers. Ultimately, with the assist of the computational study, this technique will open the door to constructing well‐ordered, three‐dimensional novel nanomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1687–1692     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。